Figure 2. Register With Bit-Field Named; Figure 3. Register With Multiple Bit-Fields Named; Figure 4. Register With Bit-Field Numbered - Sharp LH79524 User Manual

LH79524/LH79525 User's Guide
Block diagrams can include symbols representing Registers and the bit fields within them.
Figure 2 shows that the BITFIELDNAME bit field in the REGISTERNAME register enables
or disables the signal named OUTPUT.
Figure 3 is similar to Figure 2 except that Figure 3 references multiple (different)
BITFIELDS in the REGISTERNAME register.
Not all bit fields are named. If a bit field has no name, the Register is shown with numbers
indicating the appropriate bit positions, with the least significant bit on the right, as in
Figure 4. This bit ordering matches that of the Register tables, shown in Table 1.
REGISTERNAME:BITFIELDNAME
INPUT

Figure 2. Register with Bit-Field Named

REGISTERNAME: 15:3
INPUT

Figure 3. Register with Multiple Bit-Fields Named

REGISTERNAME: [BITFIELDNAME, BITFIELDNAME]
INPUT

Figure 4. Register with Bit-Field Numbered

Version 1.0
f ( ) OUTPUT
f ( ) OUTPUT
f ( ) OUTPUT
Preface
LH7A404-92
LH7A404-93
7A404-94
xxxix