Clear Dos Prevention Counter - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

clear dos prevention counter

clear dos_prevention counter
Syntax
Default
Command Mode
Usage Guideline
Examples
Switch(config)# clear dos_prevention counter
Switch(config)#
Switch(config)#show dos_prevention
DoS Prevention Information
Action: Drop
Frame Counts: 242
DoS Type
----------------------------------------------------
Land Attack
Blat Attack
Smurf Attack
TCP Null
TCP Xmas
TCP SYNFIN
TCP SYN SrcPort Less Than 1024
CLI Reference Guide
Use this command to clear the counter of all attack types.
None
None
Global configuration.
Use to reset counters of DoS prevention to zero.
This example shows how to clear counters.
Below is an example of using the show dos_prevention command to display
the DoS frame counts:
State
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
clear dos prevention counter
91