D-Link DGS-6600-48T Cli Reference Manual page 476

DGS-6604 m
Command Mode
Usage Guideline
Examples
Switch# ping 172.50.71.123
PING 172.50.71.123 (172.50.71.123): 56(84) data bytes
64 bytes from 172.50.71.123, icmp_seq=1 ttl=128 time=0.226 ms
64 bytes from 172.50.71.123, icmp_seq=2 ttl=128 time=0.184 ms
--- 172.50.71.123 ping statistics ---
packets transmitted = 2, received = 2 , packet loss = 0 (0%)
round trip times min/avg/max/mdev = 0.184/0.205/0.226/0.021 ms
Switch#
Switch# ping 2001:e10:5c00:2::101:150
PING 2001:e10:5c00:2::101:150 (2001:e10:5c00:2::101:150):56(104) data bytes
64 bytes from 2001:e10:5c00:2::101:150, icmp_seq=1 ttl=128 time=92.1 ms
64 bytes from 2001:e10:5c00:2::101:150, icmp_seq=2 ttl=128 time=0.766 ms
64 bytes from 2001:e10:5c00:2::101:150, icmp_seq=3 ttl=128 time=0.781 ms
64 bytes from 2001:e10:5c00:2::101:150, icmp_seq=4 ttl=128 time=0.774 ms
64 bytes from 2001:e10:5c00:2::101:150, icmp_seq=5 ttl=128 time=0.760 ms
--- 2001:e10:5c00:2::101:150 ping statistics ---
packets transmitted=5, received=5, packet loss=0 (0%)
round trip times min/avg/max/mdev= 0.760/19.040/92.120/36.540 ms
Switch#
CLI Reference Guide
-w: 0 (Don't stop)
-W: 1 second
Management interface configuration or User EXEC
The ping command sends an echo request packet to an address, and then
awaits a reply. Ping output can help to evaluate path-to-host reliability, delays
over the path, and whether the host can be reached or is functioning.
Note : The specified "OPTIONS" can be any combination of the parameters but
the parameters must be specified in the alphabetical order and the upper case is
ahead of the lower case. For example, e the following sequences cannot be used
with the specified parameters: "ping -c COUNT -Q TOS -A 10.90.90.90". The
correct usage is: "ping -A -Q TOS -c COUNT 10.90.90.90".
This example shows how to ping the host with IP address 172.50.71.123.
This example shows how to ping the host with IPv6 address
2001:e10:5c00:2::101:150.
ping
466