Neighbor Peer-Group (Create Group) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

neighbor peer-group (create group)

neighbor PEER-GROUP-NAME peer-group
no neighbor PEER-GROUP-NAME peer-group
Syntax Description
PEER-GROUP-NAME Name of the BGP peer group
Default
Command Mode
Usage Guideline
Example
Switch(config)# router bgp 65100
Switch(config-router)# neighbor ALPHA-GROUP peer-group
CLI Reference Guide
Use this command to create a peer group. Use the no form of the command to
remove a peer group.
Not configured
Router configuration
Address family configuration
Often in a BGP or multiprotocol BGP speaker, multiple neighbors are configured
with the same update policies (that is, the same outbound route maps,
distribution lists, filter lists, update source, and so on).
Neighbors with the same update policies can be grouped into peer groups to
simplify configuration and make update calculations more efficient.
This example shows how to create a peer group named ALPHA-GROUP
neighbor peer-group (create group)
432