Ip Dhcp Screening Trap-Log - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip dhcp screening trap-log

ip dhcp screening trap-log
no ip dhcp screening trap-log
Syntax
Default
Command Mode
Usage Guideline
Example
switch#configure terminal
switch(config)# ip dhcp screening trap-log
CLI Reference Guide
Used to enable trap/log function and use the no form to disable trap/log function.
None
Disabled
Global configuration mode
Use this command to enable the function of trap/log. It will log illegal server IP
address, ingress port and send trap if any DHCP server packet is not authorized
and dropped if user turns on this function.
The following example shows to enable trap/log function of DHCP screening:
ip dhcp screening trap-log
222