Show Ip Dvmrp Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip dvmrp interface

show ip dvmrp interface [INTERFACE-ID [,|-] ]
Syntax Description
INTERFACE-ID [ , | - ] (Optional) Specifies a single interface, a range of interfaces separated by a
,
-
Default
Command Mode
Usage Guideline
Example
Switch#show ip dvmrp interface vlan1000
Interface Address
--------- ---------------
vlan1000 10.0.0.254
Total Entries: 1
Switch#
CLI Reference Guide
This command is used to display dvrmp configuration information on interface.
hyphen, or a series of interfaces separated by a comma. If no interface is
specified, the switch displays DVRMP information on all interfaces at which
DVMRP is enabled (That is for all of DVMRP enabled interfaces).
Only VLAN interface are allowed to be specified for this command.
(Optional) Specifies a series of interfaces, or separate a range of interfaces from
a previous range. No space is allowed before and after the comma.
(Optional) Specifies a range of interfaces. No space is allowed before and after
the hyphen.
None
User EXEC or any configuration mode
This command displays interface related information about Distance Vector
Multicast Routing Protocol (DVMRP).
This example shows how to display the DVMRP configuration information about
interface VLAN 1000.
Metric
------
1
Generation ID
-------------
1234567890
show ip dvmrp interface
616