Mstp Instance; Show Spanning-Tree Mst - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show spanning-tree mst

show spanning-tree mst [configuration [digest]]
show spanning-tree mst [instance INSTANCE-ID [, | -] ]
show spanning-tree mst [instance INSTANCE-ID [ , | - ] interface INTERFACE-ID [ , | - ] ]
Syntax Description
configuration
digest
instance INSTANCE-
ID
[ , | -]
interface
INTERFACE-ID
[ , | - ]
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use the command to show the information that used in MSTP version.
Specifies to display a table of the mapping relationship between VLANs and
MSTP Instances.
Specifies to display the MD5 digest included in the current MST configuration
identifier (MSTCI).
Specifies to show the MSTP information for the designated instance only.
Multiple instances can be defined. Use ',' to specify a series of instances, or
separate a range of instances from a previous range. Or use '-' to specify a range
of instances. No space before and after the comma or hyphen.
Show the MSTP information for the specified interface. Multiple interfaces can
be defined. Use ',' to specify a series of interfaces, or separate a range of
interfaces from a previous range. Or use '-' to specify a range of interface. No
space before and after the comma or hyphen.
None
User EXEC or any configuration mode
MSTP-specific information is only displayed by this command, and this command
is applicable only when the MSTP mode is enabled.
Issuing the command without any argument will
information.
An error message will appear if the operating mode is STP or RSTP.
show spanning-tree mst
show all the MSTP specific
740