D-Link DGS-6600-48T Cli Reference Manual page 382

DGS-6604 m
Default
Command Mode
Usage Guideline
Example
Switch (config-if) # lldp dot3-tlv-select mac-phy-cfg
Switch (config-if) # no lldp dot3-tlv-select mac-phy-cfg
CLI Reference Guide
No IEEE 802.3 Organizationally Specific TLV is selected.
Interface configuration.
The lldp dot3-tlv-select command enables the advertisement of the optional
IEEE 802.3 Organizationally Specific TLVs. The respective TLV will be
encapsulated in LLDPDU and sent to other devices if the advertisement state
is enabled.
This example shows how to enable advertising MAC/PHY Configuration/Status
TLV:
This example shows how to disable advertising MAC/PHY Configuration/Status
TLV:
lldp dot3-tlv-select
372