DGS-6604
ipv6 nd retrans-timer
ipv6 nd retrans-timer <0-4294967295>
no ipv6 nd retrans-timer
Syntax Description
<0-4294967295>
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch # configure terminal
Switch (config) # interface vlan1
Switch (config-if) # ipv6 nd retrans-timer 4294967295
Switch (config-if) #
CLI Reference Guide
This command is used to configure IPv6 RA (router advertisement) retrans timer
per interface on this switch. The no form of this command sets the retrans timer
to the default value.
The IPv6 router advertisement retrans timer range in milliseconds.
0
VLAN interface configuration
The VLAN interface must be created first before this command can be used.
When the reachable time is set to the default value or set to "0", the system will
use 1 second for this interface, but the RA packet will be set to "0".
This example shows how to configure the IPv6 retrans timer setting:
ipv6 nd retrans-timer
338