Key Chain - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

key chain

key chain NAME-OF-KEY
no key chain NAME-OF-KEY
Syntax Description
NAME-OF-KEY
Default
Command Mode
Usage Guideline
CLI Reference Guide
To manage authentication keys, define a key chain, identify the keys that belong
to the key chain, and specify how long each key is valid by using the key chain
command. To remove the key chain, use the no form of this command.
The name used for a key chain (a displayable string). The maximum string
length of key chain is 32. If the string includes spaces, then it must be enclosed
in quotes (""). A key chain must have at least one key and can have up to 32
keys.
No key chains are configured.
Global configuration
Routing Information Protocol (RIP) Version 2 uses key chains for authentication.
To enable authentication, a key chain with named keys must first be created.
It is recommended that only one key chain be configured per interface.
key chain
361