Lacp Port-Priority - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lacp port-priority

L
lacp port-priority PRIORITY
no lacp port-priority
Syntax Description
PRIORITY
Default
Command Mode
Usage Guideline
Example
Switch(config)# interface range eth3.4-3.5
Switch(config-if)# lacp port-priority 20000
CLI Reference Guide
Use the lacp port-priority command to configure the port priority. Use the no
form to configure the port priority to the default.
Specifies the port priority. The range is 1 to 65535.
32768
Interface configuration
The lacp port-priority command is used to specify which ports can join a port
channel and which ports are specified to be in backup mode. In a port priority
comparison, a numerically lower value has a higher priority. If two or more ports
have the same priority, the port number determines the priority.
This example shows how to configure the port priority to 20000 on interface
eth3.4 to eth3.5.
Verify the settings with the show channel-group command.
lacp port-priority
365