Server - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

server

server {tacacs | xtacacs} IP-ADDRESS [auth-port PORT-NUMBER] [timeout SECONDS]
[retransmit COUNT ]
server tacacs+ IP-ADDRESS [auth-port PORT-NUMBER] {key KEY-STRING | no-encrypt}
server radius IP-ADDRESS [auth-port PORT-NUMBER] {key KEY-STRING | no-encrypt}
[timeout SECONDS ] [retransmit COUNT ]
no server {tacacs | xtacacs | tacacs+ | radius} IP-ADDRESS
Syntax Description
tacacs
xtacacs
tacacs+
radius
IP-ADDRESS
auth-port
PORT-NUMBER
key KEY-STRING
no-encrypt
timeout SECONDS
retransmit COUNT
Default
Command Mode
Usage Guideline
CLI Reference Guide
Set up a server for different types of methods. Use the no form of this command
to delete a server.
Specifies tacacs authentication.
Specifies xtacacs authentication.
Specifies tacacs+ authentication.
Specifies radius authentication.
Specifies the IP address of the authentication sever.
(Optional) Specifies theTCP or UDP destination port for authentication requests.
The port-number argument specifies the port number for authentication
requests.
The key for TACACS+ or RADIUS authentication. This argument is only present
for TACACS+ and RADIUS. The key can be from 1 to 32 characters. The syntax
is a general string that does not allow space.
No encryption for TACACS+ and RADIUS authentication. This argument is only
present for TACACS+ and RADIUS.
The time in seconds for waiting server reply. The range of timeout is 1 - 255
seconds.
Specifies the number of switch system resend an authentication request to the
server when no response is received. The value is from 0 to 3, and 0 to disable
the retransmit.
radius auth-port PORT-NUMBER: 1812
tacacs/xtacacs/tacacs+ auth-port PORT-NUMBER: 49
timeout: 5 seconds
retransmit: 2
aaa group server configuration
Enable TACACS, XTACACS, TACACS+, or RADIUS authentication method for
login and enable access to the switch. The first created authentication method
will be the primary one. The maximum number of entries in the list is project
server
526