Clear Mac Address-Table - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

clear mac address-table

clear mac address-table { dynamic [ address MAC-ADDR | interface INTERFACE-ID | vlan
VLAN-ID ] }
Syntax Description
address MAC-ADDR
interface
INTERFACE-ID
vlan VLAN-ID
Default
Command Mode
Usage Guideline
Example
Switch# clear mac address-table dynamic address 00:08:00:70:00:07
CLI Reference Guide
Use the clear mac address-table command to delete from the MAC address
table:
• specific dynamic address,
• all dynamic addresses on a particular interface,
• all dynamic addresses,
• or all dynamic addresses on a particular VLAN.
Delete the specified dynamic MAC address.
The specified interface can be a physical port or port-channel.
(Optional) Specifies the VLAN ID; valid values are from 1 to 4094.
None
Privileged EXEC
When using the address MAC-ADDR argument, only the dynamic entries will be
cleared.
This example shows how to remove a specific MAC address from the dynamic
address table:
Verify the information was deleted by entering the show mac address-table
command.
clear mac address-table
111