Clock Timezone - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

clock timezone

clock timezone {+|-} HOURS-OFFSET [ MINUTES-OFFSET ]
no clock timezone
Syntax Description
+|-
HOURS-OFFSET
MINUTES-OFFSET
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)# clock timezone - 8
Switch(config)# end
CLI Reference Guide
Use the command to set the time zone for display purpose. To set the time to
Coordinated Universal Time (UTC), use the no form of this command.
'+' means time to be added to the UTC; '-' means time to be subtracted from the
UTC.
Hours difference from UTC.
(Optional) Minutes difference from UTC.
UTC
Global configuration
The time obtained by SNTP server refers to the UTC time. The local time will be
calculated based on UTC time, time zone, and the daylight saving configuration.
The following example shows how to set the time zone to Pacific Standard Time
(PST), which is 8 hours behind UTC:
Verify the settings by entering the show clock command.
clock timezone
119