Show Ip Rip Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip rip interface

show ip rip interface [INTERFACE-ID]
Syntax Description
interface
INTERFACE-ID
Default
Command Mode
Usage Guideline
Example
Switch# Show ip rip interface
vlan1 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Send v2-broadcast: Disabled
Authentication Mode: text
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:
10.72.63.80/8
vlan2 is up, line protocol is up
Routing Protocol: RIP
Receive RIP packets
Send RIP packets
Send v2-broadcast: Disabled
Authentication Mode: text
Passive interface: Disabled
Split horizon: Enabled with Poisoned Reversed
IP interface address:
20.72.63.80/8
CLI Reference Guide
Display interface specific information for RIP.
(Optional) Specifies the interface ID to display the RIP information for. If no
INTERFACE-ID is specified, the RIP information on all interfaces will be shown.
None
User EXEC or any configuration mode
show ip rip interface will display interface specific information, such as:
authentication, send version, receive version, and v2 broadcast mode.
The following output shows the show ip rip interface command:
show ip rip interface
673