D-Link DGS-6600-48T Cli Reference Manual page 640

DGS-6604 m
Display Field
Descriptions
Display Field
IGMP version
Interface
Uptime
Expires
Group mode
Last reporter
Forward
CLI Reference Guide
The following table shows the display field information for the example on the
previous page.
The version of IGMP. The version of IGMP that the multicast group has
reported.
Interface ID of VLAN in which the multicast IP address is reported.
The time elapsed since the entry has been created in the format of
[n]DT[n]H[n]M[n]S
The time that the entry will be removed if there is no refresh on the entry in the
format of [n]DT[n]H[n]M[n]S.
"never" indicates that the entry will not be time out, because a local receiver is
on the router for this entry.
"stopped" indicates that the time-out of this entry is not determined by this
expire timer. If the router is set to Include mode for a group, then the whole
group entry times out after the last source entry has timed out (unless the
mode is changed to Exclude mode before it times out).
Include or Exclude: The group mode is based on the type of membership
reports that are received on the interface for the group.
static: If this group is configured statically on the port (or port-channel)
interface.
dynamic: If this port (or port-channel) interface receives a host's IGMP
membership report for the group.
Last host to report being a member of the multicast group.
Status of whether the router is forwarding multicast traffic due to this entry.
Description
show ip igmp snooping group
630