Ip Dhcp Relay Hops - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip dhcp relay hops

ip dhcp relay hops HOP-COUNT
Syntax Description
HOP-COUNT
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)#ip dhcp relay hops 5
CLI Reference Guide
Use this command to configure the maximum number of relay hops that the
DHCP packets can traverse.
The number of relay hops that the DHCP packets can traverse. The valid setting
is 1-16. Every time that a DHCP packet is relayed, the relay hop-count will be
increment by 1. If the relay hop count in the received packet is equal to or greater
then the specified value, the packet will be discarded.
4
Global configuration
Use this command to specify the maximum number of relay hops that the DHCP
packets can traverse.
This example shows how to set maximum number of router relay hops 5:
Verify the settings by entering the show ip dhcp relay command.
ip dhcp relay hops
245