Show Ip Pim Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip pim interface

show ip pim interface [INTERFACE-ID] [detail]
Syntax Description
INTERFACE-ID
detail
Default
Command Mode
Usage Guideline
Examples
switch #show ip pim interface
Address
-------------- ---------- ------ -------- ------- -------------- ----------
90.1.1.1
30.1.1.1
Total Entries: 2
CLI Reference Guide
Use this command to show the interface information.
(Optional) Specifies the interface to display the interface information for. Only
VLAN interface IDs are applicable.
(Optional) Use to display the interface information in detail.
None
User EXEC or any configuration mode
Use this command to display interface related information. If no interface is
specified, the PIM information on all applicable interfaces will be shown.
The following example displays interface information.
Interface Mode
vlan100 Sparse 1
vlan200 Dense
On the following page is an example which displays the interface information in
detail.
Neighbor DR
Count Priorty
1
1 0
DR
90.1.1.1
0.0.0.0
show ip pim interface
Generation
ID
164598300
375693
662