Show Lldp Local Interface - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show lldp local interface

show lldp local interface INTERFACE-ID [, | -] [brief | detail ]
Syntax
Description
INTERFACE-ID
,
-
brief
detail
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
To display the each physical interface information, which will be carried in the
LLDP TLVs and sent to neighbor devices, use the show lldp local interface
command.
Display the currently available information to advertise LLDP for specific
interface. Valid interfaces are physical interface
(Optional) Specify a series of interfaces, or separate a range of interfaces from
a previous range. No space before and after the comma.
(Optional) Specify a range of interfaces. No space before and after the hyphen.
(Optional) Display the information in brief mode.
(Optional) Display the information in detailed mode.
If neither brief nor detail is specified, display the information in normal mode.
Not applicable
EXEC mode or any configuration mode
This command displays the each physical interface information currently
available for populating outbound LLDP advertisements. If the advertising TLVs
are classified as global information, e.g. System Name, use the command show
lldp to get them.
The following is sample output from the show lldp local interface command to
display outbound LLDP advertisements for eth4.4 in detailed mode.:
show lldp local interface
799