D-Link DGS-6600-48T Cli Reference Manual page 491

DGS-6604 m
Example
Switch(config)# class-map police
Switch(config-cmap)# match access-list 101
Switch(config-cmap)# policy-map policy1
Switch(config-pmap)# class police
Switch(config-pmap-c)# police cir 64 bc 128 pir 128 be 256 exceed-action
drop violate-action drop
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface eth3.1
Switch(config-if)# service-policy policy1
Switch(config-if)# end
Switch# show policy-map policy1
Policy Map policy1
Class police
police tr-tcm cir 64 bc 128 pir 128 be 256
exceed-action : drop
violate-action : drop
Switch#
CLI Reference Guide
Example In the following example, two-rate traffic policing is configured on a
class called police to limit traffic to an average committed rate of 64 kbps and a
peak rate of 128 kbps, and the policy map named policy1 is attached to eth3.1.
Verify the settings by entering the show policy-map command.
police cir
481