Spanning-Tree Mst (Forward | Max-Age | Max-Hops) - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

spanning-tree mst (forward | max-age | max-hops)

spanning-tree mst { forward-time SECONDS | max-age SECONDS | max-hops HOP-COUNT }
Syntax Description
forward-time
SECONDS
max-age SECONDS
max-hops
HOP-COUNT
Default
Command Mode
Usage Guideline
Example
Switch# configure terminal
Switch(config)#spanning-tree mst forward-time 14
Switch(config)#spanning-tree mst max-age 19
Switch(config)#spanning-tree mst max-hops 19
Switch(config)# end
CLI Reference Guide
Use this command to configure the Protocol Timers used by the STP module in
MSTP mode.
The maximum delay time in seconds for one BPDU to be transmitted by a bridge
and received from another bridge. The range is 4 to 30 seconds.
Used to determine if a BPDU is valid. The range is 6 to 40 seconds.
Used to restrict the forwarded times of one BPDU. The range is 1 to 20 hops.
forward-time:15 seconds
max-age: 20 seconds
max-hops: 20 hops
Global configuration
There are some constraints on the relationship of the three timers. Please refer
to the following formulas:
2 × (Bridge_Forward_Delay - 1.0 seconds) >= Bridge_Max_Age
Bridge_Max_Age >= 2 × (Bridge_Hello_Time + 1.0 seconds)
This example shows how to configure bridge timers for MSTP version.
spanning-tree mst (forward | max-age | max-hops)
849