D-Link DGS-6600-48T Cli Reference Manual page 275

DGS-6604
Examples
Switch# configure terminal
Switch(config)# interface vlan1
Switch(config-if)# ip igmp snooping mrouter-designate interface eth3.1
Switch(config-if)# exit
Switch(config)#
Switch(config)# interface vlan5
Switch(config-if)# ip igmp snooping mrouter-designate interface eth3.1
Error: eth3.1 is not vlan5 member
Switch(config-if)#exit
Switch(config)#
Switch(config)# interface vlan4
Switch(config-if)# ip igmp snooping mrouter-designate interface vlan5
% Interface type not support vlan5
Switch(config-if)# exit
Switch(config)#
CLI Reference Guide
This example shows how to add a multicast router port on vlan1.
Verfiy the settings by entering the show ip igmp snooping mrouter command.
This example displays a configuration error, eth3.1 (on vlan4) is not eligible to be
designated as a multicast router interface for VLAN 5.
This example displays an error, the system is not allowing the configuraiton
because the VLAN interface is not eligible to be designated as a multicast router
interface.
Verfiy the settings by entering the show ip igmp snooping mrouter command.
ip igmp snooping (multicast router)
265