Show Dot1V - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show dot1v

show dot1v { protocol-group [ GROUP-ID [ , | - ] ] | interface [ INTERFACE-ID [ , | - ] ] }
Syntax Description
protocol-group
GROUP-ID
interface
INTERFACE-ID
,
-
Default
Command Mode
Usage Guideline
Example
Switch# show dot1v interface eth3.1-3.3
Interface
--------- ------------------------------------------
eth3.1
eth3.2
eth3.3
Switch#
CLI Reference Guide
Use the show dot1v command to display the setting for the configuration of
VLAN protocols.
Show the protocol VLAN table entry information.
Specifies the dot1v protocol table entry number.
Show the protocol VLAN group binding information of the ports.
Specifies the interface to display.
(Optional) Specifies a series of interfaces or GROUP-ID, or separate a range of
interfaces from a previous range. No space before and after the comma.
(Optional) Specifies a range of interfaces or GROUP-ID. No space before and
after the hyphen.
None
User EXEC or any configuration mode
Use the show dot1v command to display the current protocol VLAN status.
Show the protocol VLAN group list table using the show dot1v protocol-group
command. Show the protocol VLAN binding of the ports using the show dot1v
interface command.
This example shows how to display protocol VLAN binding of interface ports 3.1
to 3.3.
dot1v Group ID/Binding-VLAN
1/1
10/3000, 11/3001, 12/3002
2/100
show dot1v
576