Show Ipv6 Protocols [Process-Id Ospf | Rip ] - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ipv6 protocols [PROCESS-ID ospf | rip ]

show ipv6 protocols [PROCESS-ID ospf | rip ]
Syntax Description
PROCESS-ID
ospf
rip
Default
Command Mode
Usage Guideline
Examples
Switch > enable
Switch # show ipv6 protocols ospf
Routing Protocol is "ospfv3 null"
Configured Router ID : auto
Redistribute route default metric: auto
Auto-cost Reference-bandwidth: 100
Distance: (default is 110)
Don't originate type 5 default route
Redistributing:
type metric metric_type
---------------------------------------
connected 20 2
static 20 2
rip 20 2
CLI Reference Guide
Use this command to display the parameters and current state of the active IPv6
OSPF or RIP routing protocol processes.
(Optional) Internally used identification parameter for an IPv6 OSPF routing
process. It is locally assigned and can be any positive integer. A unique value is
assigned for each IPv6 OSPF routing process.
(Optional) Display OSPFv3 global settings which are related to the overall IP
routing function.
(Optional) Display RIPng global settings which are related to the overall IP
routing function.
None
User EXEC or any configuration mode
The information displayed by the show ipv6 protocols command is useful in
debugging routing operations. The output can help to identify a router suspected
of delivering faulty routing information.
The information displayed by the show ipv6 protocols rip command is useful in
debugging routing operations.
If no option is specified, the summary of all of running routing protocols will be
displayed .
The following is sample output from the show ipv6 protocols ospf command.
show ipv6 protocols [PROCESS-ID ospf | rip ]
698