DGS-6604
m
show ip policy
show ip policy
Syntax
Default
Command Mode
Usage Guideline
Example
Switch#show ip policy
Interface
------------ --------------------
vlan1
Vlan2
Vlan100
Switch#
CLI Reference Guide
Use the command to display the route map used for policy based routing.
Not applicable.
Not applicable.
EXEC mode.
The user can use the command to display the policy based routing configured on
interfaces.
The following is sample output from the show ip policy command:
Route-map
pbr-map1
pbr-map2
pbr-map3
show ip policy
785