D-Link DGS-6600-48T Cli Reference Manual page 675

DGS-6604 m
Switch#show ip pim mroute
PT - Prune Timer, PPT - Prune Pending Timer, ET - Expiry Timer,
PLT - Prune Limit Timer, GRT - Graft Retry Timer,
AT - Assert Timer, KAT - Keep Alive Timer, OT - Override Timer,
SAT - Source Active Timer, SRT - State Refresh Timer
Flags: D - Dense, S - Sparse, T - SPT-bit set
(*,239.1.1.1) Uptime: 0DT0H31M15S,
RP: 70.1.1.3, RPF neighbor:30.1.1.3, RPF Interface: vlan1
Upstream Interface:
Join State: Joined, Join Timer: 39 secs
Downstream Interface List:
Vlan2:
JP State: No Info, ET:Off, PPT: Off
Assert State: No Info, AT: Off,
Assert Winer: 0.0.0.0, Metric: 0, Pref: 0,
(70.233.235.100, 239.1.1.1) Uptime: 0DT0H3M8S, flags: ST
RPF neighbor: None, RPF Interface: None
Register State: Pruned, Register Stop Timer: 20 secs
Upstream Interface:
Join State: Joined, Join Timer: off, KAT: 22 secs,
Downstream Interface List:
Vlan2
JP State: No Info , ET: 20 secs, PPT: Off
Assert State: No Info, AT: Off,
Assert Winer: 0.0.0.0, Metric: 0, Pref: 0
(70.233.235.100, 239.1.1.1, rpt) Uptime: 0DT0H3M8S, flags: S
RP: 70.1.1.3, RPF neighbor: None, RPF interface: None
Upstream Interface:
Prune State: RPT Not Joined, Override Timer: Off
Downstream Interface List:
vlan2
Prune State: No Info, ET: Off, PPT: Off
(90.233.235.100, 239.1.1.100) Uptime: 0DT0H1M8S, flags: D
State-Refresh Originator State: Originator
SAT: 200 secs , SRT: 30 secs
Upstream Interface:
vlan100, Prune State: No Info, Assert State: No Info
GRT: off, OT: off, PLT: off
vlan200
JP State: No Info, PT: Off, PPT: off
Assert State: No Info, AT: Off,
Assert Winer: 0.0.0.0, Metric: 0, Pref: 0
CLI Reference Guide
flags: S
Downstream Interface List:
show ip pim mroute
665