Dot1X Initialize - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 mm

dot1x initialize

dot1x initialize [ interface INTERFACE-ID [ mac-address MAC-ADDRESS ] ]
Syntax Description
interface
INTERFACE-
ID
mac-address
MAC-ADDRESS
Default
Command Mode
Usage Guideline
Examples
Switch# dot1x initialize interface eth4.1
Switch# dot1x initialize interface eth4.1 mac-address 00-40-10-28-19-78
CLI Reference Guide
Use this command to initialize the authentication state machine of:
• a port in port-based mode.
-or-
• an associated MAC address in host-based mode.
(Optional) Specifies a physical interface to initialize. In port-based mode,
initialize the authenticator state machine of a port. In host-based mode, initialize
all authenticator state machines of associated MAC addresses on this port.
(Optional) Specifies a MAC address to initialize. This option is valid only in host-
based mode. Will initialize the authenticator state machine of this assigned MAC
address on a specific port.
None
Privileged EXEC
Entering dot1x initialize without any keyword will initialize all authentication
states for all ports in port-based mode, or all MAC addresses associated in host-
base mode.
This example shows how to initialize the authentication state machine on eth4.1.
This example shows how to initialize the authentication state machine associated
with MAC address 00-40-10-28-19-78 on eth4.1.
dot1x initialize
167