Lldp Hold-Multiplier - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lldp hold-multiplier

lldp hold-multiplier VALUE
no hold-multiplier
Syntax
VALUE
Default
Command Mode
Usage Guideline
Example
Switch(config)# lldp hold-multiplier 3
Switch(config)# no lldp hold-multiplier
CLI Reference Guide
To set the hold multiplier for LLDP updates on the switch, use the lldp hold-
multiplier command. Use the no form of this command to return to the default
settings.
Specifies a multiplier on the LLDPDUs transmission interval that
used to
compute the time to live value of an LLDPDU; valid values are from
2 to 10.
4
Global configuration
This parameter is a multiplier on the LLDPDUs transmission interval that used to
compute the TTL value in an LLDPDU. The lifetime is determined by hold-
multiplier times tx-interval and up to 65535. At the partner switch, when the time-
to-live for a given advertisement expires, the advertised data is deleted from the
neighbor switch's MIB.
This example shows how to set LLDP hold-multiplier to 3:
This example shows how to set LLDP hold-multiplier to default value.
lldp hold-multiplier
374