DGS-6604
m
neighbor description
neighbor { IP-ADDRESS | PEER-GROUP-NAME } description TEXT
no neighbor { IP-ADDRESS | PEER-GROUP-NAME } description
Syntax Description
IP-ADDRESS
PEER-GROUP-NAME Name of a Border Gateway Protocol (BGP) peer group.
TEXT
Default
Command Mode
Usage Guideline
Example
Switch(config)# router bgp 65100
Switch(config-router)# neighbor 172.16.10.10 description ABC in China
CLI Reference Guide
Use this command to associate a text description with a neighbor. Use the no
form of the command to remove the description.
Specifies IP address prefixes.
Specifies a descriptive string for the neighbor. The maximum length is 80
characters. The syntax is a general string that allows space.
None
Router configuration
When a BGP peer group is specified using the PEER-GROUP-NAME argument,
all the members of the peer group inherit the characteristics configured with this
command.
The following example shows how to configure a description for the neighbor
172.16.10.10:
Verify the settings by entering the show ip bgp neighbor command.
neighbor description
430