Show Ip Pim Mroute - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip pim mroute

show ip pim mroute
Syntax
Description
Default
Command Mode
Usage Guideline
Example
CLI Reference Guide
This command displays the PIM IP multicast routing table
None
None
User EXEC or any configuration mode
Use this command to display all entries in the IP multicast routing table.
The switch populates the multicast routing table by creating source, group (S,G)
entries from star, group (*,G) entries. The star (*) refers to all source addresses,
the "S" refers to a single source address, and the "G" is the destination multicast
group address. When creating (S,G) entries, the software uses the best path to
that destination group which is found in the unicast routing table (that is, through
Reverse Path Forwarding [RPF]).
The following page shows a sample output from the command show ip pim
mroute.
show ip pim mroute
664