Lldp Tx-Interval - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lldp tx-interval

lldp tx-interval SECONDS
no lldp tx-interval
Syntax Description
SECONDS
Default
Command Mode
Usage Guideline
Examples
Switch(config)# lldp tx-interval 50
Switch(config)# no lldp tx-interval
CLI Reference Guide
To set the LLDPDUs transmission interval on the switch, use the lldp tx-interval
command. Use the no form of this command to return to the default settings.
Specifies the interval between consecutive transmissions of LLDP
advertisements on each physical interface. The range is from 5 to 32768
seconds.
30 seconds
Global configuration
This interval controls the rate at which LLDP packets are sent.
This example shows how to set LLDP updates are sent every 50 seconds.
This example shows how to set LLDP transmission interval to default value:
lldp tx-interval
386