Show Ip Dvmrp Prune - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

show ip dvmrp prune

show ip dvmrp prune
Syntax
Default
Command Mode
Usage Guideline
Example
DGS-6600:15#show ip dvmrp prune
Flags: P=Pruned,D=Holddown,N=NegMFC
Source
Network
------------------ ---------------- ----- ------------ ---------------
10.0.7.101/32
10.0.7.131/32
10.1.52.99/32
Total Entries: 3
Display Field
Descriptions
Display Field
Source Network
Group Address
State
ExpTime
Prune/Graft ReTransmit
Time
CLI Reference Guide
Use this command to display DVMRP upstream prune state information.
None
None
User EXEC or any configuration mode
Display DVMRP upstream Prune state information.
This example shows how to displays prune information.
Group
Address
239.255.255.250
239.255.255.250
229.55.150.208
Description of significant display fields.
The address of the source IP address or source network.
The IP group address.
P: The upstream state is in Prune state.
D: The entry is in Hold-Down state. In this state, a negative multicast
forwarding cache (ip mroute) entry will be added.
N: Negative Multicast forwarding cache (ip mroute) is installed.
The amount of time remaining before this prune will expire.
The ramaining time before retransmitting a Prune or Graft. When "P" flag is
set in the "State" field, this timer would represent the Prune retransmit timer,
otherwise, it would represent the Graft retransmit timer.
State ExpTime
P.. 0DT1H45M44S
P.. 0DT1H47M30S
P.N 0DT1H44M36S
Description
show ip dvmrp prune
Prune/Graft
ReTransmit-Time
Off
Off
0DT0H3M50S
620