Clock Summer-Time - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

clock summer-time

clock summer-time recurring WEEK DAY MONTH HH:MM WEEK DAY MONTH HH:MM
[ OFFSET ]
clock summer-time date DATE MONTH HH:MM DATE MONTH HH:MM [ OFFSET ]
no clock summer-time
Syntax Description
recurring
date
WEEK
DAY
DATE
MONTH
HH:MM
OFFSET
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use one of the optional keyword formats of the clock summer-time command to
configure the system time to automatically set the seasonal time adjustment
(daylight saving time). To disable automatic seasonal time adjustment, use the
no form of this command.
Indicates that a summer seasonal time change should start and end on the
specified day and week of the specified month. For example: summer time
adjustment begins Sunday in the first week of April.
Indicates that summer time should start and end on the specified date of the
specified month.
Week of the month (1 to 4 or last).
Day of the week (sun, mon, and so on).
Date of the month (1 to 31).
Month (by name , January, February, and so on).
Time (24 hours format ) in hours and minutes.
(Optional) Number of minutes to add during summer time (default is 60)The
range of offset is 30, 60, 90 and 120.
Disabled
OFFSET: 60
Global configuration
Use this command to automatically make seasonal time changes for the system
clock.
The recurring mode is used to make time adjustment to begin and end on a
specified week day, week and month. Use the date mode to make the time
change begin and end on specified calender dates. The syntax for both modes
uses the first portion of the parameter to express the begining of the time
adjustment period while the ending of the period is expressed in the second
portion.
clock summer-time
117