Multicast Filtering-Mode - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

multicast filtering-mode

multicast filtering-mode { forward-all | forward-unregistered | filter-unregistered }
Syntax Description
forward-all
forward-unregistered Forward the registered multicast packet based on forwarding table, and flood all
filter-unregistered
Default
Command Mode
Usage Guideline
Example
Switch(config)# interface vlan1
Switch(config-if)# multicast filtering-mode filter-unregistered
CLI Reference Guide
Use the multicast filtering mode command to configure the method how an
interface handles unknown multicast packets.
Flood all multicast packets based on VLAN domain.
un-registered multicast packets based on VLAN domain.
Forward the registered packets based on forwarding table, and filter all un-
registered multicast packets.
forward-unregistered
Interface configuration
Only VLAN interfaces support this command.
This example shows how to set the multicast filtering mode to filter-unregistered.
Verify the setting by entering the show multicast filtering-mode command.
multicast filtering-mode
425