Snmp-Server Host - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

snmp-server host

snmp-server host { IP-ADDRESS } [version { 1| 2c | 3 {auth | noauth | priv } } ] WORD [vlan-
interface]
no snmp-server host { IP-ADDRESS }
Syntax Description
IP-ADDRESS
version
WORD
vlan-interface
Default
Command Mode
Usage Guideline
CLI Reference Guide
Use the command to specify the recipient of a SNMP notification operation. Use
the no command to remove the recipient.
Name, IPv4 or IPv6 address of the SNMP notification host.
Optional) Version of the SNMP used to send the traps. The default is 1. If you use the version
keyword, one of the following keywords must be specified:
1 —SNMPv1. This option is not available with informs.
•
2c —SNMPv2C.
•
3 —SNMPv3. The most secure model, because it allows packet encryption with the priv
•
keyword. One of the following three optional security level keywords can follow the 3 keyword:
– auth — Enables Message Digest 5 (MD5) and Secure Hash Algorithm (SHA) packet
authentication.
– noauth —Specifies that the noAuthNoPriv security level applies to this host. This is the
default security level for SNMPv3.
– priv—Enables Data Encryption Standard (DES) packet encryption (also called
"privacy").
Password-like community string is sent with the notification operation. If the version
is 3, The COMMUNITY-STRING is used as the UserName. The community string
that consists of from 1 to 32 characters. The syntax is general string that does not
allow space.
When input IP-ADDRESS is IPv6 link-local address, user must choose an existing
vlan-interface to specify output interface for a destination.
No host entry exists.
If no version option is specified, the default version is 1.
Global configuration at privilege level 15
SNMP notifications are sent as trap packets. If you do not enter an snmp-server
host command, no notifications are sent. In order to configure the switch to send
SNMP notifications, you must create at least one recipient of a SNMP notification
by snmp-server host command.
To create an SNMP host where the notification will be sent to, the user can
specify the version of notification packet. For V1 and V2 SNMP, the notification
snmp-server host
832