Lease - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

lease

lease { DAYS [HOURS | MINUTES] | infinite }
no lease
Syntax Description
DAYS
HOURS
MINUTES
Infinite
Default
Command Mode
Usage Guideline
Examples
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# lease 1
switch# configure terminal
switch(config)# ip dhcp pool pool1
switch(config-dhcp)# lease 0 1
CLI Reference Guide
Use this command to configure the lease duration of an IP address that is
assigned from a DHCP server to a client. Use the no form of this command to
restore the default value.
Specifies the duration of the lease in number of days
(Optional) Specifies the number of hours in the lease. The DAYS value must be
configured prior to HOURS.
(Optional) Specifies the number of minutes in the lease. The DAYS and HOURS
values must be configured prior to MINUTES.
Specifies the lease is unlimited
1 day
DHCP pool configuration
This command specified the duration of a lease. This command can only be
executed under DHCP pool configuration mode, identified by the (config-dhcp)#
prompt.
The following is a sample of configuring the lease, in address pool "pool1", to 1
day.
The following is sample of configuring the lease, in address pool "pool1", to 1
hour.
lease
367