Qos Aggregate-Policer - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604 m

qos aggregate-policer

Q
qos aggregate-policer NAME BPS [BURST-NORMAL] [BURST-MAX] exceed-action ACTION
[violate-action ACTION]
qos aggregate-policer NAME cir CIR [bc CONFORM-BURST] pir PIR [be PEAK-BURST]
[exceed-action ACTION [violate-action ACTION]]
no qos aggregate-policer NAME
Syntax Description
NAME
BPS
BURST-NORMAL
BURST-MAX
CIR
PIR
CONFORM-BURST
CLI Reference Guide
To define a named aggregate policer for use in policy maps, use the qos
aggregate-policer command in global configuration mode. To delete a named
aggregate policer, use the no form of this command. The qos aggregate-policer
command is for single rate policing and the qos aggregate-policer cir command
is for two rate policing.
Specifies the name of the aggregate policing rule. The NAME parameter can be
up to 32 characters, is case sensitive, and may include a-z, A-Z, 0-9, the dash
character (-), the underscore character (_), and the period character (.).The
policer names must start with an alphabetic character (not a digit) and must be
unique across all aggregate policers.
Average rate, in bits per second.
min: 64KB max:32GB
(Optional) Normal burst size in bytes.
Valid values are project dependent.
min:4KB max:16MB default:4KB. Unit is KB
(Optional) Maximum burst size, in bytes.
Valid values are project dependent.
min:4KB max:16MB default:4KB. Unit is KB
Specifies the committed information rate in Kbps. The committed packet rate is
the first token bucket for the two-rate metering.
min: 64KB max:32GB
Specifies the peak information rate in Kbps. The peak information rate is the
second token bucket for the two-rate metering.
min: 64KB max:32GB
Specifies the burst size for the first token bucket in bytes.
min:4KB max:16MB default:4KB.
qos aggregate-policer
487