Ip Dhcp Relay - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip dhcp relay

ip dhcp relay
no ip dhcp relay
Syntax
Default
Command Mode
Usage Guideline
Example
Switch > enable
Switch# configure terminal
Switch(config)# ip dhcp relay
CLI Reference Guide
Use this command to enable Dynamic Host Configuration Protocol (DHCP) relay
agent features on the switch. Use the no form of this command to disable DHCP
relay agent features.
None
Disabled
Global configuration
Use this command to enable DHCP relay function. The DHCP relay function is
disabled by default.
Enable DHCP relay function:
Verify the settings by entering the show ip dhcp relay command.
ip dhcp relay
243