DGS-6604
m
show vlan voice-vlan
show vlan voice-vlan [ oui | interface INTERFACE-ID [, | -] ]
show vlan voice-vlan [ lldp-med ] device [ interface INTERFACE-ID [, | -] ]
Syntax Description
oui
Interface
INTERFACE-ID
,
-
lldp-med
device
Default
Command Mode
Usage Guideline
Example
Switch#show vlan voice-vlan
Voice VLAN Status
Voice VLAN ID
CoS Priority
Aging time
Member ports
Dynamic member ports : eth3.4
Switch#
CLI Reference Guide
Use this command to display the voice VLAN configurations.
(Optional) Display OUI information of voice VLAN.
(Optional) Display voice VLAN information of ports.
(Optional) Specify the port to display.
(Optional) Specify a series of ports, or separate a range of ports from a
previous range. No space before and after the comma.
(Optional) Specify a range of ports. No space before and after the
hyphen.
(Optional) Display the voice devices that are discovered by LLDP-MED.
(Optional) Display the learned voice devices information.
None.
EXEC mode or any configuration mode.
This command is used to display the voice VLAN configurations and the
information of learned voice devices.
This example displays the voice VLAN global settings.
: Enabled
: 1000
: 7
: 60 minutes
: eth3.1-3.5
show vlan voice-vlan
782