D-Link DGS-6600-48T Cli Reference Manual page 540

DGS-6604 m
Switch(config)# class-map gold
Switch(config-cmap)# match cos 6
Switch(config-cmap)# exit
Switch(config)# class-map silver
Switch(config-cmap)# match cos 5
Switch(config-cmap)# exit
Switch(config)# class-map bronze
Switch(config-cmap)# match cos 0
Switch(config-cmap)# exit
Switch(config)# policy-map cust1-classes
Swtich(config-pmap)# class gold
Switch(config-pmap-c)# police 64 128 exceed-action set-dscp-transmit 0
Switch(config-pmap-c)# exit
Switch(config-pmap)# class silver
Switch(config-pmap-c)# police 64 128 exceed-action set-dscp-transmit 0
Switch(config-pmap-c)# exit
Switch(config-pmap)# class bronze
Switch(config-pmap-c)# police 64 128 exceed-action set-dscp-transmit 0
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface eth3.1
Switch(config-if)# service-policy cust1-classes
Switch(config-if)# exit
Switch(config)# interface eth3.2
Switch(config-if)# service-policy cust1-classes
Switch(config-if)# exit
CLI Reference Guide
The cust1-classes policy map is configured and then attached to eth3.1 and
eth3.2 by the following commands.
service-policy
530