Ip Multicast-Routing - D-Link DGS-6600-48T Cli Reference Manual

DGS-6604

ip multicast-routing

ip multicast-routing
no ip multicast-routing
Syntax
Default
Command Mode
Usage Guideline
Example
Switch(config)# ip multicast-routing
CLI Reference Guide
Use this command to enable IP multicast routing. Use the no form of this
command to disable IP Multicast routing.
None
Disabled
Global configuration
If the no ip multicast-routing command is used, the device stops routing
multicast packets even when the protocols are enabled.
This example shows how to enable IP multicast routing.
Verify the settings by the show system protocol-state command.
ip multicast-routing
275