Table of Contents
Advertisement
no ip dhcp snooping binding
Use this command to remove the DHCP static entry from the DHCP Snooping database.
Format
no ip dhcp snooping binding <mac-address>
Mode
Global Config
ip verify binding
Use this command to configure static IP source guard (IPSG) entries.
Format
ip verify binding <mac-address> vlan <vlan id> <ip address> interface
<interface id>
Mode
Global Config
no ip verify binding
Use this command to remove the IPSG static entry from the IPSG database.
Format
no ip verify binding <mac-address> vlan <vlan id> <ip address> interface
<interface id>
Mode
Global Config
ip dhcp snooping limit
Use this command to control the rate at which the DHCP Snooping messages come. The default rate is 15 pps with a range
from 0 to 30 pps. The default burst level is 1 second with a range of 1 to 15 seconds.
Default
15 pps for rate limiting and 1 sec for burst interval
Format
ip dhcp snooping limit {rate pps [burst interval seconds]}
Mode
Interface Config
no ip dhcp snooping limit
Use this command to set the rate at which the DHCP Snooping messages come, and the burst level, to the defaults.
Format
no ip dhcp snooping limit
Mode
Interface Config
ip dhcp snooping log-invalid
Use this command to control the logging DHCP messages filtration by the DHCP Snooping application.
Default
disabled
Format
ip dhcp snooping log-invalid
Mode
Interface Config
<mac-address>
DHCP Snooping Configuration Commands
107
Advertisement
Table of Contents
