Table of Contents
Advertisement
no users snmpv3 encryption
This command sets the encryption protocol to none. The <username> is the login user name for which the specified
encryption protocol will be used.
Format
no users snmpv3 encryption <username>
Mode
Global Config
show users
This command displays the configured user names and their settings. This command is only available for users with Read/
Write privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system.
Format
show users
Mode
Privileged EXEC
Term
Definition
User Name
The name the user enters to login using the serial port, Telnet or Web.
User Access Mode Shows whether the user is able to change parameters on the switch (Read/Write) or is only able to
view them (Read Only). As a factory default, the "admin" user has Read/Write access and the "guest"
has Read Only access. There can only be one Read/Write user and up to five Read Only users.
SNMPv3 Access
The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able to set and
Mode
retrieve parameters on the system. If the value is set to ReadOnly, the SNMPv3 user is only able to
retrieve parameter information. The SNMPv3 access mode may be different than the CLI and Web
access mode.
SNMPv3
The authentication protocol to be used for the specified login user.
Authentication
SNMPv3
The encryption protocol to be used for the specified login user.
Encryption
show users accounts
This command displays the local user status with respect to user account lockout and password aging.
Format
show users accounts
Mode
Privileged EXEC
Term
Definition
User Name
The local user account's user name.
Access Mode
The user's access level (read-only or read/write).
Lockout Status
Indicates whether the user account is locked out (true or false).
Password Expiry
The current password expiration date in date format.
Date
User Account Commands
493
Advertisement
Table of Contents
