D-Link DWS-4000 Series Cli Command Reference page 371

Field Description
Client MAC Identifies the MAC address of the wireless client (if applicable).
Address
Bytes Received Total bytes the client has received.
Bytes Transmitted Total bytes the client has transmitted.
Packets Total packets the client has transmitted.
Transmitted
Packets Received Total packets the client has received.
show captive-portal interface client status
This command displays information about clients authenticated on all interfaces or a specific interface.
Format
show captive-portal interface [slot/port] client status
Mode Privileged EXEC
Field Description
Interface Valid slot and port number separated by a forward slash.
Interface Describes the interface.
Description
Client MAC Identifies the MAC address of the wireless client (if applicable).
Address
If you use the optional [slot/port] information, the following additional information appears:
Client IP Address Identifies the IP address of the wireless client (if applicable).
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Protocol Shows the current connection protocol, which is either HTTP or HTTPS.
Verification Shows the current account type, which is Guest, Local, or RADIUS.
User Name Displays the user name (or Guest ID) of the connected client.
show captive-portal configuration client status
This command displays the clients authenticated to all captive portal configurations or a specific configuration.
Format
show captive-portal configuration [cp-id] client status
Mode Privileged EXEC
Field Description
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Client MAC Identifies the MAC address of the wireless client (if applicable).
Address
If you use the optional [cp-id] information, the following additional information appears:
Captive Portal Client Connection Commands
363