D-Link DWS-4000 Series Cli Command Reference page 357

Format
show captive-portal status
Mode Privileged EXEC
Field Description
Additional HTTP Displays the port number of the additional HTTP port configured for traffic. A value of 0 indicates that
Port only port 80 is configured for HTTP traffic.
Additional HTTP Displays the port number of the additional HTTPS secure port. A value of 0 indicates no additional port
Secure Port and the default port (443) is used.
Peer Switch Displays the interval at which statistics are reported in the Cluster Controller. The reporting interval is
Statistics in the range of 0, 15-3600 seconds where 0 disables statistical reporting.
Reporting Interval
Authentication Displays the number of seconds to keep the authentication session open with the client. When the
Timeout timeout expires, the switch disconnects any active TCP or SSL connection with the client.
Supported Captive Shows the number of supported captive portals in the system.
Portals
Configured Captive Shows the number of captive portals configured on the switch.
Portals
Active Captive Shows the number of captive portal instances that are operationally enabled.
Portals
Local Supported Shows the number of users that can be added and configured using the local user database.
Users
Configured Local Shows the number of users that are configured from the local user database.
Users
System Supported Shows the total number of authenticated users that the system can support.
Users
Authenticated Shows the number of users currently authenticated to all captive portal instances on this switch.
Users
Example: The following shows example CLI display output for the command.
(DWS-4026) #show captive-portal status
Additional HTTP Port........................... 0
Additional HTTP Secure Port.................... 0
Peer Switch Statistics Reporting Interval...... 120
Authentication Timeout......................... 300
Supported Captive Portals...................... 10
Configured Captive Portals..................... 1
Active Captive Portals......................... 0
Local Supported Users.......................... 128
Configured Local Users......................... 0
System Supported Users......................... 1024
Authenticated Users............................ 0
show captive-portal trapflags
This command shows which captive portal SNMP traps are enabled.
Note: The existing Unified Switch show trapflags command shows the global captive portal traps
configuration. For more information, see
for the captive portal SNMP traps, see
"show trapflags" on page
"statistics interval" on page
Captive Portal Global Commands
503. For information about the global settings
346.
349