D-Link DWS-4000 Series Cli Command Reference page 345

wids-security client known-db-location
Use this command to configure the location of the Known-Client database for detected clients.
Default Local
Format
wids-security client known-db-location <local | radius-server>
Mode Wireless Config
Parameter Description
local Database defined locally.
radius-server Database defined on a radius-server.
no wids-security client known-db-location
Use this command to set the location of the Known-Client database for detected clients to the default.
Format
no wids-security client known-db-location
Mode Wireless Config
wids-security client known-db-radius-server-name
Use this command to configure the radius-server name of the Known-Client database for detected clients.
Default Default-RADIUS-Server
Format
wids-security client known-db-radius-server-name <name>
Mode Wireless Config
Parameter Description
name An alphanumeric string up to 32 characters in length.
no wids-security client known-db-radius-server-name
Use this command to set the Known-Client database radius-server name for detected clients to the default.
Format
no wids-security client known-db-radius-server-name
Mode Wireless Config
detected-client ack-rogue
Use this command to change the client status from Rogue to Known or Authenticated for the specified client MAC address.
If no client is specified, the command changes the client status for all of the clients.
Format
detected-client [<macaddr>] ack-rogue
Mode Wireless Config
Detected Clients Database Commands
337