D-Link Unified Switch CLI Command Reference
U
S
NIFIED
WITCH
The commands in this section provide global Unified Switch configuration, status, and statistics.
wireless
This command enters the Unified Switch global configuration mode.
Format
wireless
Mode
Global Config
enable (Wireless Config Mode)
This command enables the Unified Switch functionality.
Default
Enable
Format
enable
Mode
Wireless Config
no enable
The no version of this command disables the Unified Switch functionality.
Format
no enable
Mode
Wireless Config
country-code
This command globally configures the country code for the Unified Switch and all managed access points. The code may
be entered in either upper or lower case. When you change the country code, the wireless function is disabled and re-
enabled automatically. The show country-code command displays all valid country codes.
Default
US
Format
country-code <code>
Mode
Wireless Config
Parameter
Description
code
This parameter must identify a valid country code.
Example: The following shows an example of the command.
(DWS-4026) (Config wireless)# country-code au <cr>
Are you sure you want to change the country code? (y/n)
© 2009 D-Link Corporation. All Rights Reserved
200
C
OMMANDS