D-Link DWS-4000 Series Cli Command Reference page 496

D-Link Unified Switch CLI Command Reference
no ip http secure-session soft-timeout
This command restores the soft timeout for secure HTTP sessions to the default value.
Format
no ip http secure-session soft-timeout
Mode Privileged EXEC
ip http secure-port
This command is used to set the SSL port where port can be 1-65535 and the default is port 443.
Default 443
Format
ip http secure-port <portid>
Mode Privileged EXEC
no ip http secure-port
This command is used to reset the SSL port to the default value.
Format
no ip http secure-port
Mode Privileged EXEC
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or to both TLS1 and
SSL3.
Default SSL3 and TLS1
Format
ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
show ip http
This command displays the http settings for the switch.
Format
show ip http
Mode Privileged EXEC
Term Definition
HTTP Mode The unsecure HTTP server administrative mode.
(Unsecure)
Java Mode The java applet administrative mode which applies to both secure and un-secure web connections.
Maximum The number of allowable un-secure http sessions.
Allowable HTTP
Sessions
HTTP Session Hard The hard timeout for un-secure http sessions in hours.
Timeout
© 2009 D-Link Corporation. All Rights Reserved
488