Table of Contents
Advertisement
no transport input telnet
Use this command to prevent new Telnet sessions from being established.
Format
no transport input telnet
Mode
Line Config
transport output telnet
This command regulates new outbound Telnet connections. If enabled, new outbound Telnet sessions can be established
until the system reaches the maximum number of simultaneous outbound Telnet sessions allowed. An established session
remains active until the session is ended or an abnormal network error ends it.
Default
enabled
Format
transport output telnet
Mode
Line Config
no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
Format
no transport output telnet
Mode
Line Config
session-limit
This command specifies the maximum number of simultaneous outbound Telnet sessions. A value of 0 indicates that no
outbound Telnet session can be established.
Default
5
Format
session-limit <0-5>
Mode
Line Config
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the default value.
Format
no session-limit
Mode
Line Config
session-timeout
This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
Default
5
Format
session-timeout <1-160>
Mode
Line Config
Telnet Commands
479
Advertisement
Table of Contents
