D-Link DWS-4000 Series Cli Command Reference page 325

(DWS-4026) #
show wireless client neighbor ap status
This command displays all the APs an associated client can see in its RF area; for associated clients this provides a reverse
view of the managed AP client neighbor list. It allows you to view where a client may roam based on its neighbor APs.
Format
show wireless client <macaddr> neighbor ap status
Mode Privileged EXEC
Field Description
macaddr Client MAC address.
MAC Address The Ethernet address of the client station.
AP MAC Address The base Ethernet address of the WS managed AP.
Location The configured descriptive location for the managed AP.
Radio The radio on the managed AP that detected this client as a neighbor.
Discovery Reason Indicates one or more discovery methods for the neighbor client. One or more of the following
abbreviated values may be displayed:
• RF Scan (RF) - The client was reported from an RF scan on the radio. Note that client stations are
difficult to detect via RF scan, the other methods are more common for client neighbor detection.
• Probe Request (Probe) - The managed AP received a probe request from the client.
• Associated to Managed AP (Assoc Managed AP) - This neighbor client is associated to another
managed AP.
• Associated to this AP (Assoc this AP) - The client is associated to this managed AP on the displayed
radio.
• Associated to Peer AP (Assoc peer AP) - The client is associated to a peer switch managed AP.
• Ad Hoc Rogue (Ad Hoc) - The client was detected as part of an ad hoc network.
show wireless vap client status
This command displays summary data for all managed AP VAPs with associated clients. If the optional VAP MAC address
is specified, the display will only show clients associated to the specific managed AP VAP.
Format
show wireless vap [<macaddr>] client status
Mode Privileged EXEC
Field Description
macaddr WS managed AP VAP MAC address.
VAP MAC Address Indicates the Ethernet MAC address for the managed AP VAP where this client is associated.
MAC Address The Ethernet address of client station.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless vap 00:02:03:04:05:08 client status
VAP MAC Address
-----------------
00:02:03:04:05:08
Client MAC Address
------------------
00:02:03:04:05:06
Client Association Status and Statistics Commands
317